pro-grade security systems at DIY prices

866-414-2553

Wood Surface Security Camera Installation Guide


Step 1:

Using the adhesive template supplied with your camera or mounting box apply template to the mounting surface.

template sticker

Step 2:

drill pilot holes

Using a drill and a 5/64 drill bit; drill pilot holes in each location marked on the mounting template.

Step 3:

If you are running the cable through the wall drill a hole large enough for the ethernet cable, a 1/2in to 1in drill bit should be sufficient. The location of the hole is marked on the center of the mounting template.

template sticker

Step 4:

attaching marshall base attaching wasp pro without a bracket

Using the supplied wood screws attach the camera or camera bracket to the wall. Use hand tools to prevent from stripping the mounting points.

In the first example, we are installing a Marshall Pro, which has a removable camera base that functions like a bracket. In the second, we are installing a Wasp Pro without a bracket.

Step 5:

Run ethernet cable through the mounting box, install the weatherproof connector, and terminate the end.

terminate the RJ45 end

Step 6:

attaching waterproof connector

Connect cameras RJ45 lead to cable and connect weatherproof coupler.

In the example, we have installed a Wasp Pro Electrical Mounting Box, and connected the camera.

Optional Step 7:

Attach camera to the mounting box using supplied fasteners, if you used a mounting box.